Samsung Color Dual Quad Network Observation System SSC21WEB User Manual page 19

SSC21WEB-1 2004.8.25
TIME LAPSE VCR
OR NORMAL VCR
5:38 PM Page 19
An additional PIR sensor or external sensor can also be connected.
The additional PIR sensor can be connected as shown in the above graphic.
Sensor's trigger signal is NO (Normal Open).
Sensor is not supplied. (Sold separately)
VIDEO OUT BNC1 ~ BNC4 terminals in the rear of the monitor are VIDEO terminals for outputting
video images from OBSEVATION CAMERA to THROUGH OUT.
BNC VIDEO output terminal can be used to connect to VCR (TIME LAPSE) or SLAVE MONITOR.
VIDEO IN
AUDIO IN
NOT USED
VIDEO OUT
AUDIO OUT
a) Connect the 6-pin plug to the VCR terminal on the rear panel.
b) Connect the VIDEO OUT plug to the VIDEO IN terminal of the VCR.
c) Connect the VIDEO IN plug to the VIDEO OUT terminal of the VCR.
d) Connect the AUDIO OUT plug to the AUDIO IN terminal of the VCR.
e) Connect the AUDIO IN plug to the AUDIO OUT terminal of the VCR.
b
VIDEO OUT
d
AUDIO OUT
f
VIDEO IN
c
AUDIO IN
e
Eng-19
a