Samsung Color Dual Quad Network Observation System SSC21WEB User Manual page 26

SSC21WEB-1 2004.8.25 5:38 PM Page 26
Sets the display date format and current time.
Move to #2. DATE/TIME MENU by using œ œ
then press the ENTER SWITCH to display the OSD as shown in the below figure. (The figure
shows the initial setting status.)
06/01/03 13:14:00
DATE/TIME SETTING
DATE TYPE MM/DD/YY
DATE 06 / 01 / 03
TIME [HH:MM:SS] 13 : 14 : 00
Move to the format item by turning œ œ
format by pressing the ENTER SWITCH.
At this time, select a target date format by turning left and right the SWITCH.
("YY/MM/DD", "MM/DD/YY", "DD/MM/YY" are available for selectable data format.)
Repeat the above instruction for moving to each item (MONTH, DAY, YEAR, HOUR, MINUTE,
SECOND) and entering the mode. Current date and time to display can be set. (It can be referred
when ALARM or LOSS occurs.)
Displays each picture for pre-set time and automatically switches it to the next picture
at SEQUENTIAL DISPLAY MODE.
Move to #3. DWELL TIME menu by using œ œ
MENU, and press the ENTER SWITCH to display the following OSD as shown in the below
figure. (The figure shows the initial setting status.)
06/01/03 13:14:00
DWELL TIME SETTING
CAM1 03 SEC
CAM2 03 SEC
CAM3 03 SEC
CAM4 03 SEC
CAM5 03 SEC
CAM6 03 SEC
CAM7 03 SEC
CAM8 03 SEC
QUAD-A 03 SEC
QUAD-B 03 SEC
√ √ SWITCH, and enter the mode for setting date
Eng-26
√ √ SWITCH at setup menu,
√ √ SWITCH at SETUP