Pair Usb Adapter Again - Plantronics Voyager 4200 UC series User Manual

Pair USB adapter again

1
2
3
Typically, your USB adapter is pre-paired to your headset. In the event that your adapter is
disconnected or bought separately, you will need to pair the adapter to your headset.
Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait for your
computer to recognize it.
Put your headset in pair mode.
Put your Bluetooth USB adapter into pair mode by pressing and holding the recessed pair button
with a pen or paperclip until the Bluetooth USB adapter flashes red and blue.
NOTE
Adapter design may vary
Pairing is successful when you hear "pairing successful" and "PC connected" and the Bluetooth
USB adapter LED is solid blue.
6