Table of Contents
Advertisement
2) Move to 'DHCP...' by using ▲/▼ KEY in NETWORK ACCESS, then press ENTER
SWITCH to set to DHCP.
06/01/03
DHCP ACCESS
DNS 1
DNS 2
3) DNS 1 and DNS 2 will be automatically set to DNS as shown above.
Use œ œ / √ √ KEY to change it.
4) After setting, move to the main screen by using the MENU button.
5) Set values will be stored as shown below. It takes 2 or 4 seconds.
06/01/03
NETWORK SETTING
On completion of the DHCP setup, the screen, [D] is displayed.
If the network connection is cancelled or cut, [D] starts blinking.
6) You can view the video source of the SMO-211QN/SMO-150QN from a remote location
PC.
7) Make sure the remote PC meets the minimum specification requirements described in
Chapter 5. Each product feature (Eng-91) and make sure that the PC is internet capable.
13:14:00
168.126.63.001
168.126.63.002
13:14:00
[D]
Eng-44
13:14:00
CAM1
Advertisement
Table of Contents
