Samsung SMO-150QN User Manual page 109

Ez view kit:remote monitoring video surveillance system

Table of Contents

Step-by-Step Setup Example of IP Router

Netgear model WGR614v4

1. Click the "Router Status"

2. Click the WAN and LAN Port information.

Write down the WAN Port IP Subnet Mask number and the LAN Port IP Address number.

You will need it later when setting up the SMO-211QN/SMO-150QN.

3. Click "Advanced" and "Port Forwarding"

4. Port forwarding (HTTP)

! Click "Add Custom Service"

@ Service Name : Set this to "HTTP"

# Start Port and End Port : Set both to "From 10000 to 65535"

$ Server IP Address : SETUP MENU -> 7. NETWORK SETUP -> Check IP from

* It is not in use by any other device connected to the IP Router including the Local PC.

% Make sure "Enable" is checked.

^ Click "Add"

5. Close browser window.

SMO-211QN/SMO-150QN

10000

network status to apply it identically to Private IP after DHCP

setup. (Eng- 41 Setup)

Eng-109

10000

192.168.0.101

Table of Contents

Smo-211qn