To Select The Source; To Edit The Input Source Name - Samsung PL-42C71HP Owner's Instructions Manual

To Select the Source

Use to select TV or other external input sources connected to the TV.
Use to select the input source of your choice.
T V Input
Source List : TV
Edit Name
Move Enter
T V Source List
TV
AV1 : -----
AV2 : -----
S-Video : -----
Component1 : -----
Component2 : -----
PC : -----
HDMI : -----
Move Enter

To Edit the Input Source Name

Name the device connected to the input jacks to make your input source selection easier.
T V Input
Source List : TV
Edit Name
Move Enter
T V Edit Name
AV1 : -----
AV2 : -----
S-Video : -----
Component1 : -----
Component2 : -----
PC : -----
HDMI : -----
Move Enter
T V Edit Name
AV1 : -----
AV2 : -----
S-Video : -----
Component1 : -----
: -----
Component2
Satellite STB
PC : -----
HDMI : -----
Move Enter
1. Press the MENU button to display the menu.
Press the ... ... or † † button to select "Input", then press the ENTER button.
2. Press the ENTER button to select "Source List".
Press the ... ... or † † button to select signal source, then press the ENTER button.
➢
You can choose between the following sets of jacks: AV1, Component1, Component2,
PC, HDMI on the TV's rear panel and AV2 or S-Video on the TV's side panel.
➢
HDMI input can only be selected when the external device is turned on and connected
Return
via HDMI.
➢
In case of PL-42Q91HP/50Q91HP models, the Source List displays HDMI1 and HDMI2
instead of HDMI.
➢
You can choose only those external devices that are connected to the TV.
Return
Press the SOURCE button on the remote control to view an external signal source.
You can enter TV mode directly by using the TV button on the remote control.
You can enter HDMI mode directly by using the HDMI button on the remote control.
(PL-42C91HP/50C91H/42C71HP models only)
1. Press the MENU button to display the menu.
Press the ... ... or † † button to select "Input", then press the ENTER button.
Press the ... ... or † † button to select "Edit Name", then press the ENTER button.
Return
2. Press the ... ... or † † button to select "AV1", "AV2", "S-Video", "Component1",
"Component2", "PC", or "HDMI" input jack, then press the ENTER button.
➢
In case of PL-42Q91HP/50Q91HP models, the Source List displays HDMI1 and
HDMI2 instead of HDMI.
Return
3. Press the ... ... or † † button to select "VCR", "DVD", "D-VHS", "Cable STB",
"HD STB", "Satellite STB", "AV Receiver", "DVD Receiver", "Game",
-----
VCR
"Camcorder", "DVD Combo", "DHR", or "PC" input source, then press
DVD
D-VHS
the ENTER button.
Cable STB
HD STB
Press the EXIT button to exit.
†
➢
When a PC with a resolution of 640 x 480@60Hz is connected to the HDMI IN 1 port,
you should set the HDMI1 mode to PC in the Source List of Input mode. If the HDMI1
Return
mode is not PC, it may work depending on the TV setting.
English-24