Samsung PL-42C71HP Owner's Instructions Manual page 48

Selecting a Signal Source (External A/V) for PIP.
T V PIP
PIP : On
Source : TV
Size :
Position :
Channel : 3
Move Enter
Changing the Size of the PIP Window
T V PIP
PIP : On
Source : TV
Size :
Position :
Channel : 3
Move Enter
Changing the Position of the PIP Window
T V PIP
PIP : On
Source : TV
Size :
Position :
Channel : 3
Move Enter
Changing the PIP Channel
T V PIP
PIP : On
Source : TV
Size :
Position :
Channel : Air
Move Enter
3. Press the ... ... or † † button to select "Source", then press the ENTER button.
Select the source of the sub picture (PIP) by pressing the ... ... or † † button,
TV
then press the ENTER button.
AV1
➢
AV2
The sub picture can serve different source selections based on what the main picture is
set to.
Return
Press the SOURCE button on the remote control to select a signal from an external source
in PIP.
4. Press the ... ... or † † button to select "Size", then press the ENTER button.
Press the ... ... or † † button to select the desired size of the PIP window, then press
the ENTER button.
➢
If main picture is in PC mode, Size is not available.
➢
You may notice that the picture in the PIP window becomes slightly unnatural when
you use the main picture to view a game or karaoke.
➢
Return
Only in the HDMI mode is available the option Size.
5. Press the ... ... or † † button to select "Position", then press the ENTER button.
Press the ... ... or † † button to select the desired PIP window position, then press the
ENTER button.
Return
Press the POSITION button on the remote control to change the position of the PIP
screen.
6. Press the ... ... or † † button to select "Channel", then press the ENTER button.
Press the ... ... or † † button at the bottom of the remote to select the desired channel
in the PIP window, then press the ENTER button.
➢
The channel can be active when the sub picture is set to TV.
▲
3 3
▲
Return
Press the PIP CH and buttons on the remote control to change the PIP channel.
English-48