Siemens Argus 7SR21 Technical Manual page 453

Overcurrent relay

Hide thumbs Also See for Argus 7SR21:

Table of Contents

Binary Output Status Points

Static (Steady-State) Object Number: 10

Change Event Object Number: 11

Control Relay Output Blocks (CROB) Object Number: 12

Binary Output Command Event Object Number: 13

Static Variation reported when variation 0 requested: 1 (Binary Output w/o status)

Change Event Variation reported when variation 0 requested: 1 (Binary Output Event w/o Time)

Command Event Variation reported when variation 0 requested: 1 (Command Status w/o Time)

34 Settings Group 1

35 Settings Group 2

36 Settings Group 3

37 Settings Group 4

38 Settings Group 5

39 Settings Group 6

40 Settings Group 7

41 Settings Group 8

42 Auto-reclose on/off

43 Hot Line Working on/off

44 E/F Out on/off

45 SEF Out on/off

Chapter 4 - Data Communications Definitions

or 2 (Binary Output with status)

or 2 (Binary Output Event with Time)

or 2 (Command Status with Time)

Latch On Latch On

Latch On Latch On

Latch On Latch On

Latch On Latch On

Pulse Off Pulse On

Pulse Off Pulse On

Chapter 4 - Page 73 of 96

Show Quick Links

Chapters

Table of Contents