Siemens Argus 7SR21 Technical Manual page 205

7SR220 Instrumentation Guide
Miscellaneous Meters
Instrument
--------------------
MISCELLANEOUS METERS
> to view
--------------------
Start Alarm
Count
Target
Hrs In Service Time
Time
Date 01/01/2000
Time 22:41:44
Waveform Recs
Fault Recs
Event Recs
Data Log Recs
Settings Group
1.19. Quick Logic Meters
Instrument
--------------------
QUICK LOGIC METERS
> to view
--------------------
E 1-8 ---- ----
E 9-16 ---- ----
E1 Equation
EQN
TMR 0-0
CNT 0-1
E16 Equation
EQN
TMR 0-0
CNT 0-1
1.20. Fault Locator
Instrument
--------------------
FAULT LOCATOR METER
> to view
--------------------
Distance
Impedance
Reactance
Page 20 of 20
Description
This is the sub-group that includes indication such as the relays time and
date, the amount of fault and waveform records stored in the relay
TEST/RESET ► allows access to this sub-group
This meter displays the Start Alarm count.
0
100
This meter displays the amount of time in service
0Hrs
This meter displays the Date, Time, Waveform Records and the number of
Fault Records stored in the relay
0
0
0
This meter displays the Event Records, Data Log Records and Active
0
Settings Group number stored in the relay
1
Description
This is the sub-group that includes all the meters that are associated with
QuickLogic. TEST/RESET ► allows access to this sub-group
Shows the state of all the equations
Shows the state of an individual equation. EQN shows the equation state.
=0
TMR shows the timer progress and state for the equation. CNT shows the
count progress and state for the equation.
=0
=0
Shows the state of an individual equation. EQN shows the equation state.
=0
TMR shows the timer progress and state for the equation. CNT shows the
count progress and state for the equation.
=0
=0
Description
This is the sub-group that includes all the meters that are associated
with the Fault Locator TEST/RESET ► allows access to this sub-
group
0.0%
Displays the Fault Location.
0.0ohms
0.0ohms
© 2017 Siemens Protection Devices Limited