Keurig Platinum B70 Owner's Manual page 8

Set-Up & First Brew (continued)
SECTION 1
Once size is chosen, press BREW Button.
c.
BREW Button will stop flashing, Left and Right
Buttons will no longer be lit and icon
Extra-Small Cup
of brew size will be lit.
(3.25 oz.)
Large Mug
(9.25 oz.) The LCD Control Center will now display the
7.
word 'BREWING' and the serving size you
Small Cup
(5.25 oz.)
selected will be illuminated on LCD (fig. 8).
CAUTION: There is extremely hot water in the
Travel Mug
(11.25 oz.)
K-Cup
Small Mug
(7.25 oz.) risk of injury, do not lift the Handle or open the
K-Cup
process.
8. There may be a short pause prior to coffee
being dispensed. The entire brew process
8
fig.
lasts for approximately 1 minute and ends
with a burst of air to remove all liquid from
the K-Cup
BREWING
Lift the Handle, remove
9.
and dispose of the
used K-Cup
MENU
CAUTION: K-Cup
will be hot.
MENU
10.
BREW
Holder during the brew process. To avoid
®
Assembly Housing during the brew
®
.
®
.
®
®
Enjoy your first cup
of Keurig Brewed
®
gourmet coffee, tea
or hot cocoa!
Your Brewer may display "NOT READY" as it heats water for the next
11.
brew cycle. The "READY TO BREW" indication will return to the LCD
Control Center in about 15 seconds.
Stopping the Brew Process
If you need to stop the brewing after the process has started, press and
release the Power Switch to turn the Brewer 'OFF'. The flow of coffee, tea
or hot cocoa will stop, the heating element will shut off and the blue lights
illuminating the LCD Control Center and Water Reservoir will disappear.
NOTE: You may get more coffee, tea or hot cocoa in your cup during your next
brew. We recommend that you perform a cleansing brew with water-only after
a terminated brew. Then your NEXT brew will be the volume you have selected.
adding Water
9
fig.
The LCD Control Center of your Brewer will
indicate when the water level in the tank is low
NOT READY
or if the Water Reservoir has been removed by
ADD
WATER
displaying the words "ADD WATER" (fig. 9). The
blue light in the Water Reservoir will also blink
MENU
when water needs to be added. The Brewer will
not allow you to brew when "ADD WATER" is
MENU
displayed (fig. 9).
BREW
8