Programming Brew Temperature - Keurig Platinum B70 Owner's Manual

SECTION 2 Controls & Indicators (LCD Control Center)
simply press the Power Button and you can
15
fig.
brew as soon as the water is heated and the
"READY TO BREW" indicator is displayed on
the LCD Control Center.
H M
NOTE : The On time and Off time functions
operate independently from one another. To
SET C LOCK
AUTO OFF
ONOFF TIME
cancel either function, follow the steps above
BREW TEMP
BREW SIZE
and use the "H" and "M" Buttons to advance to
MENU
12:00 AM. When you reach 12:00 AM,
the Control Center will display 'OFF' and the
function will be disabled (fig. 15).
MENU
NOTE: The Auto Off timer and the On/Off Time
programming options operate independently,
Set Set
BREW
Hours Minutes
but can also be programmed to work together.
For example, you can set the On Time function to
turn on at 7:00 AM and then set the Auto Off timer
function to turn off the Brewer two hours after
the last brew.
Programming Brew Temperature (187° – 192º F)
The Brewer brews at a preset temperature of 192°. You can adjust this
temperature down by 5 degrees if you prefer a cooler cup of coffee, tea
or hot cocoa. Simply follow the instructions below.
16
fig.
-
C LOCK
AUTO OFF SET
ONOFF TIME SET
SET BREW TEMP
BREW SIZE
MENU
MENU
- +
BREW
12
Press the MENU Button on the LCD Control
1.
Center five times to program the Brew
Temperature feature.
The LCD Control Center will now display
2.
the programming options with a small
arrow next to "SET BREW TEMP" (fig. 16).
Also, the temperature 192° (initial setting)
will be displayed at the top of the LCD
Control Center to indicate the current
temperature setting.
A minus sign will appear over the Left
3 .
Button and/or a plus sign over the Right
Button. Use these Buttons to raise or lower
the temperature one degree at a time.
Once you have reached your desired brew
4.
temperature, press the MENU Button twice
to exit the programming mode. "BREW TEMP
SET" will be displayed in the LCD Control
Center if you have changed it from 192°.