Exmark QUEST QZS708GEM50200 Operator's Manual page 13

135-2469
34 or 42 Inch Models with Exmark 708cc Engine
1. Fast
2. Slow
3. Choke–On
This machine complies with the industry standard stability test in the static lateral and longitudinal tests with the
maximum recommended slope indicated on the decal. It is important that each operator review the slope operation
instructions in the operator's manual and review the conditions in which the machine is being operated to determine
if the machine may be operated in the conditions that day and on that site. Changes to terrain can result in a
1. Warning—Read the Operator's Manual.
2. Cutting hazard. Pinch hazard—Keep hands and feet away
from moving parts. Keep all guards and shields in place.
3. Thrown object hazard—Keep bystanders a safe distance
from the machine, pick up debris before operating, and
keep the deflector shield down.
decal135-2469
4. Choke–Off
5. Optional hour meter
accessory
135-3295
change in slope operation for any machine.
50 or 60 Inch Models with Exmark 708cc Engine
1. Fast
2. Slow
4. Bodily harm hazard—Do Not carry passengers; look
behind you when mowing in reverse.
5. Ramp hazard—When loading onto a trailer, Do Not use
dual ramps. Only use a singular ramp wide enough for the
machine. Back up the ramp (in reverse) and drive forward
off the ramp.
6. Tipping hazard—Do Not use on slopes near open water.
Do Not use on slopes greater than 15°.
13
Safety
135-2470
3. Choke–On
4. Choke–Off
decal135-2470
decal135-3295