Exmark QUEST QZS708GEM50200 Operator's Manual page 16

Specifications
– 34 and 42 inch E-Series model: Two Hydro
Gear ZT2100 Integrated drive systems.
– 50 and 60 inch S-Series model: Two Hydro
Gear ZT2800 Integrated drive systems.
• Hydraulic Oil Type: Exmark Premium Hydro Oil.
• Hydraulic Filter—50 and 60 inch S-Series: P/N
109-3321
• Hydro Service Kit—50 and 60 inch S-Series: P/N
135-2307
• Speeds:
– 0-7.0 mph (11.3 km/hr) forward.
– 0-5.0 mph (8.0 km/hr) reverse.
• Drive wheel releases, located on left and right
sides of engine deck, allow machine to be moved
when the engine is not running and brake is off.
Tires and Wheels
Deck Size 34
Quantity 2
Turf Tech TL
Tread
Size 18 x 6.00-8
Ply Rating 4
Pressure 13 psi
(90 kPa)
Deck Size 50
Quantity 2
Tread Turf Tech TL
Size 20 x 10-10
4
Ply Rating
Pressure
13 psi
(90 kPa)
Deck Size
34 and 42
2
Quantity
Tread Smooth
Drive
Pneumatic (Air-Filled)
42
2
Turf Tech TL
18 x 7.50-8
4
13 psi
(90 kPa)
Drive
Pneumatic (Air-Filled)
60
2
Turf Tech TL
20 x 10-10
4
13 psi
(90 kPa)
Front Caster
Pneumatic (Air-Filled)
50 and 60
2
Smooth
Size 11 x 4-5
Ply Rating 2
Pressure 13 psi
(90 kPa)
Cutting Deck
• Cutting Width:
– 34 inch Deck: 34 inches (86 cm)
– 42 inch Deck: 42 inches (107 cm)
– 50 inch Deck: 50 inches (127 cm)
– 60 inch Deck: 60 inches (152 cm)
• Discharge: Side
• Blade Size:
– 34 inch Deck: 17.50 inches (44.5 cm)–Qty: 2
– 42 inch Deck: 21.60 inches (54.9 cm)–Qty: 2
– 50 inch Deck: 17.50 inches (44.5 cm)–Qty: 3
– 60 inch Deck: 20.50 inches (52.1 cm)–Qty: 3
• Blade Spindles: Solid steel spindles with no
maintenance bearings.
• Deck Drive: Electric clutch mounted on vertical
engine shaft. Blades are driven by one belt
(w/self-tensioning idler) direct from the engine.
• Deck: Full floating deck is attached to out-front
support frame. Maximum turf protection is
provided with anti-scalp rollers.
Deck design allows for bagging, mulching or side
discharge.
• Deck Depth:
– 34 inch Deck: 4.0 inches (10.2 cm)
– 42 inch Deck: 4.0 inches (10.2 cm)
– 50 inch Deck: 4.0 inches (10.2 cm)
– 60 inch Deck: 4.0 inches (10.2 cm)
• Cutting Height Adjustment: A hand deck lift lever
with foot assist is used to adjust the cutting height
from 1 1/2 inch (3.8 cm) to 4 1/2 inches (11.4
cm) in 1/2 inch (1.3 cm) increments.
• Mulching Kit: Optional.
16
Front Caster
13 x 6.5-6
4
13 psi
(90 kPa)