Sending A Fax; Preparing A Document - Samsung sf 150 Operator's Manual

Ch-3 3/25/98 6:28 PM Page 2
C h a p t e r
T F
HE
In this chapter, you will learn how to send and receive fax documents, use the four fax
reception modes, and the voice request feature.

Sending a Fax

Preparing a Document

Here are some things you can do to improve the quality of your faxed documents:
¥ Send documents printed using a typewriter, felt trip pen, black ink, or laserwriter.
¥ The paper should be white or very light and of normal weight.
¥ Do not attempt to feed the following types of document into the unit, or they may jam.
Instead, make a photocopy first, and then send the copy.
- Wrinkled or creased paper
- Curled or rolled paper
- Torn paper
- Carbon paper or carbon-backed paper
- Coated paper
- Too thin (less than 0.074mm) or thick (more than 0.15mm) paper
¥ Remove clips, staples, or other similar objects from documents before feeding them
into the machine.
¥ Let ink or paste on documents dry completely before sending.
¥ The machine can transmit documents with the following size.
¥ The shaded parts of the document shown below are not recorded by the receiving
facsimile machine. Write your information within the effective scanning area.
T h r e e
M
AX ACHINE
216mm
Up to maximum
Maximum
of 1500mm
216mm
5mm approx.
Feeding
direction
1.8mm approx.
152mm
Minimum 127mm
C T T
HAPTER HREE : HE
3.1
F M
AX ACHINE