SHR-1040/1040K USER'S MANUAL
5. SEQUENCE KEY
G
The Sequence Key is used for automatic channel sequencing. It is enabled only in Live Mode.
G
Channels are switched in sequence and the Loss channel without video signals are skipped
during the Dwell Time set by the Setup Menu.
(Switch from 1channel ➝ 2 channel)
☛
Sequence in the Full Screen
☛
Sequence of the Main Channel 1 in the PIP Screen
SUB2 ➝ SUB3 ➝ SUB4 ➝ SUB2 ➝ ......
6. ALARM KEY
G
Cancel the alarm when alarm is enabled.
5-5
English
CH1 ➝ CH2 ➝ CH3 ➝ CH4 ➝ CH1 ➝ CH2 ➝ CH3 ➝ CH4 ➝ ......