SHR-1040/1040K USER'S MANUAL
3
Key Functions
1. CHANNEL KEY & MODE KEY
G
Use the CHANNEL Key when you want to view the channel in full screen.
G
Press the desired channel key to view the channel in full screen.
G
Audio of the channel is also selected. The S mark appears next to the title of the selected
channel, and the audio of the channel is off.
G
Audio recording is available for the one selected channel.
G
Press the MODE Key to view the 1CH MODE and the QUAD MODE in turn as shown in the
picture.
2. PIP KEY
G
Use the PIP Key to view the main and the sub screen at the same time.
G
You can view the two channels when pressing the PIP button in the 1CH mode.
G
Press the ENTER Key in PIP mode to switch the main and sub screen.
G
Press the PIP Key again to exit the PIP state and enable the Single screen mode.
G
Press the FREEZE Key to freeze the main screen only. On the top right of the screen,
'||'(FREEZE MARK) appears.
G
Clear the Freeze before operating another key.
G
Press the Sequence Key in the PIP mode PIP to automatically sequence to the sub screen.
(Auto sequence is cleared when pressing the Sequence Key again.)
☛
Sequence in the PIP MAIN CHANNEL 1 screen
SUB2 ➝ SUB3 ➝ SUB4 ➝ SUB2
5-3
English