Auto Channel Memory; Channel Add/Delete - Samsung DVD-V9090 Instruction Manual

Auto Channel Memory

Auto Channel Memory will automatically seek and store
all active channels in your area.
1 Open "MENU"
With the DVD in Stop or Play mode, press the
MENU button.
2 Select "SETUP"
Using the UP/DOWN buttons, move the selection
bar to "SETUP" then press ENTER to select.
3 Select "Channel"
Using the UP/DOWN buttons, move the selection
bar to "Channel", then press ENTER to select.
Language : English
Front Display : Auto
Auto Power Off : Off
4 Run "Auto channel memory"
Move the selection arrow to "Auto Channel
Memory," then press ENTER to select.
• The DVD-VCR will automatically search for all
available channels in the selected Tuner Band.
This procedure may take a few minutes to
complete.
• When finished, the lowest channel found will be
displayed.
Ant./Cable : Antenna
RF Output CH : 3CH
Auto Channel Memory

Channel Add/Delete

Channel Add/Delete
Use this feature if Auto Channel Search missed a
channel that you would like to add, delete a channel
you wish to remove.
1 Open "MENU"
With the DVD in Stop or Play mode, press the
MENU button.
2 Select "SETUP"
Using the UP/DOWN buttons, move the selection
bar to "SETUP" then press ENTER to select.
3 Select "Channel"
Using the UP/DOWN buttons, move the selection
bar to "Channel", then press ENTER to select.
Language
Front Display
Auto Power Off
4 Select "Channel Add/Delete"
Move the selection bar to "Channel Add/Delete,"
then press ENTER to select.
Ant./Cable
RF Output CH
Auto Channel Memory
Channel Add/Delete
5 Select Channel to Add/Delete
Use the CH
number you wish to add or delete.
6 Select "Channel Add/Delete"
Press RIGHT button to add or press left button to
delete the channel from your channel list.
• Repeat steps 4 and 5 to add or delete additional
channels.
CHANNEL ADD/DELETE
Select channel :
and press [❿] to ADD
press [➛] to DELETE
RETURN
ENG-14
: English
: Auto
: Off
: Antenna
: 3CH
/ ❷ buttons to tune in the channel
[02]
CH ❷