Table of Contents
Advertisement
4.
COMMISSIONING
4.1
Commissioning
When commissioning the appliance and when starting it after a prolonged stop, it must
be thoroughly cleaned to eliminate all residue of extraneous material (see Routine main-
tenance).
Cleaning at commissioning
Do not use pressurised or direct water jets to clean the appliance.
Remove the outer protective film by hand and thoroughly clean all the outside parts
of the appliance. When finished with the cleaning described for the outside of the
appliance, proceed as described in "Daily Cleaning" (see 9 Routine maintenance).
4.2
Daily activation
Procedure:
1. Check the cleanliness and hygiene of the appliance.
2. Make sure that the room exhaust system works properly.
3. When necessary, plug the appliance into the appropriate socket.
4. Open the network locks upstream the appliance (Gas - Water - Electric).
5. Make sure that the water drain (if present) is not clogged.
6. Proceed with the operations described in "Starting production".
4.3
Daily and prolonged deactivation
Procedure:
1. Close the network locks upstream the appliance (Gas - Water - Electric).
2. Make sure that the drain cocks (if present) are "Closed".
3. Check the cleanliness and hygiene of the appliance(See Routine Maintenance).
In the event of prolonged inactivity, protect the parts more exposed to oxidation as de-
scribed in the specific chapter (See Routine Maintenance). Routine maintenance).
4.4
Starting production
Before proceeding with these operations, see "Daily activation".
When loading the product into the appliance and unloading it, the-
re is a residual risk of being burnt; this risk can occur coming into
unintentional contact with: cooking compartment, pans, material
treated.
Take appropriate measures for personal protection. Wear protec-
tive equipment suitable for the operations to be performed.
GAS BURNER ON /°C flashing-GAS BURNER OFF /°C fixed (Fig.
1/E- Screen 3)
4.5
Turning-on/Turning-off
Press the "ENTER" button (Fig 1/A) ) and proceed to manual cooking (see 6.1)
o press the "MENÙ" key (Fig 1/B) to activate the main menu (Fig 6.1/B). Use
the"MINUS" and "PLUS" keys to select the desired function (Fig 1/C ). Press
"ENTER" to confirm.
In function selection mode, after 5 seconds of inactivity the oven
memorizes the function or value displayed (Display 2 - 3 - 4).
To proceed with shutdown:
1. In main menu mode, press the "MINUS" or "PLUS" (Fig. 1/C) to the "OFF"
function (Display 1). Press "ENTER" (FIG 1/A) TO CONFIRM.
2. In function mode, press the "ENTER" button to stop the operation, press
"MENù" button (Fig. 1/B) and press the "MINUS" button (Fig. 1/C) to display the "OFF" function (Display
1). Press "ENTER" button (Fig. 1/A-see 3.3 Description of operating modes).
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
- 11 -
11
D
Schermo 1
Schermo 2
E
Schermo 4
C
B
A
Fig.1
Hide quick links:
Advertisement
Table of Contents
