Disposal - Hobart ecomax Use And Maintenance Manual

DISPOSAL

Deactivation and scrapping of appliance
OBLIGATION OF DISPOSING OF MATERIALS USING THE LEGISLATIVE PROCEDURE IN
FORCE IN THE COUNTRY WHERE THE APPLIANCE IS SCRAPPED.
PURSUANT TO the directives (see section no. 0.1) relating to the reduction of use of the hazardous sub-
stances in the electrical and electronic appliance and to the waste disposal. The symbol of the barred
waste bin carried on the appliance or its packaging indicates that the product at the end of its useful life
it must be disposed of separately from other waste.
Sorted waste disposal of products at the end of their useful life is organised and managed by the ma-
nufacturer. The user should dispose of this equipment contacting the manufacturer and following the
system adopted by the latter to allow the separate collection of the equiment at the end of its service life.
Appropriate separate collection for subsequent start-up of equipment assigned to recycling, treatment
and disposal that is environmentally compatible contributes to avoiding possible negative effects on
the environment and on health and promotes the reuse and/or recycling of the materials of which the
equipment is composed. If the holder of this product disposes of it illegally, this involves the application
of administrative sanctions provided by the laws in force.
Specialised personnel is in charge of deactivation and scrapping of the appliance.
Waste disposal
During operation and maintenance, do not disperse pollutants (oils, grease, etc.) into the
environment and perform differentiated waste disposal depending on the composition of
the different materials and in compliance with relevant laws in force.
Illegal waste disposal will be prosecuted by laws in force in the territory where the violation has been
ascertained.
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
- 25 - 25