Menu Selection And - Yaesu FT-1000MP Operating Manual

Menu Programming
-
Selection & Settings
Menu Se ection and Settings
In the last chapter, basic and advanced opera-
tion were covered to explain the various trans-
ceiver features. This chapter covers all of the
menu selections entries and their settings used by
the transceiver. These functions were described
previously, but must be configured as desired
using menu programming. Menu selections are
shown as they appear in the display to assist you
as you go along.
Menu Selections
Seventy-nine transceiver settings are con-
tained in programming menu (refer to the menu
list shown on the opposite page). To view and edit
menu selections, press
FAST
+
PI:
FAST
IJzFcLl
Selects the number of default memory chan-
nels (from 1-99) made available from within group
1. If all 99 memory channels are enabled, group 2
is not configurable.
Selects the number of default memory chan-
nels (from 1-99) made available from within group
2 if less than 99 memory channels are enabled in
group 1. If all 99 memory channels are enabled,
group 3 is not configurable.
Selects the number of default memory chan-
nels made available from within group
3
if groups
1 and 2 are not configured for 99 channels total.
If all 99 memory channels are enabled, group 4 is
The SUB VFO-B display shows the selection
not configurable.
name, while MAIN VFO-A display shows the cur-
G-1-1
~ , - P L ~ - ~ H
rent (default) setting.
Selects the number of default memory chan-
Rotating the
MEMNFO CH
knob displays the
nels made available from within group 4 if groups
various selections, whose numbers appear in the
1, 2, &
3
are not configured for 99 channels total.
memory channel box.
If all 99 memory channels are enabled, group 5 is
not configurable.
Rotating the Main VFO knob lets you choose
between the various settings available for the
3-5
krPSecH
displayed selection. Some settings are merely an
Selects the number of default memory than-
'
offlon switch, while others are variable tuning step
nels made available from within arour, 5 (to 99
sizes, time and frequency values, or mode
total) if groups 1, 2, 3 & 4 are norcokfiguied for
choices. 99 channels total.
Default (current) Setting Selection Number Selection Name
MEMIVFO
CH
use the MAIN VFO knob
use the MEMNFO CH
to change default settings
knob to choose the
menu selection
name & number
page 85