Yaesu FT-1000MP Operating Manual page 18

General ln farmalion
Main Receiver Disp ndications
(1
(10)
QMB
(Quick Memory Bank)
This appears when the PTT is keyed and Indicates stored memories from the Quick
'
transmission is occurring. Memory Bank are active for recall and operation.
This appears whenever the Main receiver VFO tuning or VFO operation is selected.
squelch is open (VFO-A).
(12)
(MEMI
(3)
rn
This indicator shows that memory operation is
-
-
This appears whenever the Sub receiver
selected (by pressing
1 - 1 ) .
squelch is open (VFO-B).
(1 3) ( m E l
(4)
Appears while retuning a selected memory
Fast VFO tuning rate is active.
channel.
(5)
This indicates that dual-receive operation is
activated.
(6)
This indicator appears whever split-frequency
operation is activated (by pressing the
SPLlT
but-
ton).
(7)
Front panel tuning knob and/or buttons are
locked.
(8)
This appears whenever general coverage tun-
ing is selected (when tuning outside an amateur
band).
(9)
Tuning Offset Scale
Displays sub-resolution tuning steps or clarifier
offset in segmented increments.
(1 4)
O O Q
One of these segments lights along with the
[RPTI
indicator when the repeater function is acti-
vated in the FM mode, indicating the direction of
TX offset.
(1 5) Frequency Display
This displays the current operating frequency,
and also provides alphanumeric chracter display
of programming menu selections and settings.
(1 6)
This indicator comes on when the ATU is acti-
vated and in-line.
(1
7)
Appears when the ATU is seeking the best
impedance match with the antenna. It also flashes
each time the transceiver microprocessor sends
frequency update data to the ATU microprocessor
(while you tune).
page 16