Setting Up The Mycam Menu; Avatar - Samsung Digimax U-CA 3 User Manual

Setting up the MYCAM menu

You can set up a start up image, start up sound, shutter sound and AVATAR. Every camera
working mode (with the exception of Voice recording mode) has the MyCAM menu.
Menu tab

Avatar

You can transfer avatar files created with the DigiStudio program to the camera and play them
back in Play mode (SUCAxxxx.mov) or use the desired avatar as the startup image
(SAVAxxxx.mov).
- In order to be able to save an avatar to the camera, the camera driver must be installed on
your PC. For installation instruction, please refer to page 95.
- Avatar : The word "avatar" came from ancient Sanskrit and referred to the incarnation of a god that
appears in this world. In computer terms, an avatar is a 3D or 2D graphic representation.
Storing Avatars for the Startup Image
1. Connect the camera to your PC. (See page 83.)
2. Open Windows Explorer, select the folder in which your
avatars are located (C:\My Avatar), and then select
avatar(s) for the startup image (SAVAxxxx.mov).
3. Right-click on the avatar and select [Copy].
4. Select the DCIM \AVATAR folder in the removable drive.
5. Right-click on the removable drive and select [Paste] to
copy the avatar(s) to the memory card.
Main menu
AVATAR
S.IMAGE
S.SOUND
SH.SOUND
Sub menu
OFF
CHANGE
OFF
IMAGE2
OFF
SOUND2
OFF
SOUND2
Page
P.74
IMAGE1
P.75
IMAGE3
SOUND1
P.76
SOUND3
SOUND1
P.76
SOUND3
73