Using The Batteries; Removing The Battery; Using The Digimax Battery Pack; ( Optional : Sbp-3603, 3.3V) - Samsung Digimax U-CA 3 User Manual

Connecting to a Power Source

Using the batteries

1. Open the battery chamber
cover by pushing in the
direction of the arrow.

Removing the battery

There are 3 indicators for battery condition that are displayed on the LCD monitor.
Battery indicator
Battery status
Using the Digimax battery pack ( Optional : SBP-3603, 3.3V)
The Digimax Battery Pack is a rechargeable external Li-ion
battery for use with most digital cameras. These optional
battery packs provide long lasting power and their operating
performances are much improved over Ni-MH and Alkaline
batteries. This is due to the mass storage lithium ion cell.
Refer to the illustrations
: If the camera does not turn on after you have inserted batteries, please
check whether the batteries are inserted with the polarity(+ and-).
2. Insert the batteries according
to the polarity marks (+ and -)
on the back of the battery
chamber cover.
1. Turn off the camera power. Open the battery chamber cover
and move the battery holder aside. The battery will be
released.
2. Take out the battery and close the battery chamber cover.
The batteries are fully
charged.
3. To close the battery
chamber cover, push it
until it clicks.
Prepare new batteries.
There is no battery
capacity. Replace with
new batteries.
15