Pictbridge: Print Setting - Samsung Digimax U-CA 3 User Manual

PictBridge: Print Setting

You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File
Name Print menus for printed pictures.
1. Connect the camera to your printer. The USB menu must
be set to [PRINTER] before you connect the camera to
the printer.(See p.58)
2. The [PICTBRIDGE] menu will appear.
3. Use the UP and DOWN buttons to select [PRINTER
SETUP], and then press the RIGHT button.
4. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
If [DEFAULT] is selected
: The print format will be set to the printer's default
values.
If [CUSTOM] is selected
: A window from which the user can set up the print
format with the desired values will appear.
Use the UP and DOWN buttons to select a
submenu value, and then press the RIGHT button.
Auxiliary menus will appear. Use the UP and DOWN buttons to select the desired
auxiliary menu, and then press the OK button.
The menus you can set up are as follows:
Menu
SIZE Setting the size of the printing paper
Setting the number of pictures to be printed on a
LAYOUT
sheet of paper
PAPER
Setting the quality of the printing paper
QUALITY
Setting the quality of the picture to be printed
DATE
Setting whether to print the date
FILENAME Setting whether to print the file name
Depending on the manufacturer and model of your printer, some menus are inaccessible.
Even though these menus will still appear on the LCD monitor, but you will not be able to select them.
60
Function
PICTBRIDGE
IMAGES
SETUP DEFAULT
PRINT CUSTOM
BACK: SET:OK
CUSTOM
SIZE POSTCARD
LAYOUT 4X6
PAPER 8X10
QUALITY A6
DATE A4
BACK: SET:OK
Sub menu
POSTCARD, 4X6, 8X10, A6, A4,
B5
FULL, 1, 2, 4, 6, 8, INDEX
PLAIN, PHOTO, FASTPHOTO
DRAFT, NORMAL, FINE
ON, OFF
ON, OFF