Lamp; Connecting To A Power Source - Samsung Digimax U-CA 3 User Manual

Identification of features
Still image mode

Lamp

Type
When turning on the power
When the camera is in focus (when the
SHUTTER button is pressed halfway)
When the camera is out of focus (when the
SHUTTER button is pressed halfway)
While the flash is charging
Flash is ready (when the SHUTTER
button is pressed halfway)
While saving an image
While shooting a video
During voice recording
While the camera is connected to a PC
Whi l e transferri n g data between the camera and a PC
When shooting an image
While the self-timer is running
When the LCD monitor is
turned off in Still Image mode

Connecting to a Power Source

There are two ways in which to provide the camera with power. You can use batteries or
alternatively, you can use an AC(100 ~ 250V) Adapter (DC 3.3V 2.0A).
We recommend using batteries for a digital camera.
(use batteries that are within a year of their date of manufacture) The batteries are listed below.
Non rechargeable batteries
Rechargeable batteries
Battery pack
You can select from Auto, Manual, or Night mode. In Myset
mode, any changes made to settings other than Self-Timer and
Voice Recording will be maintained even after the camera is
turned off.
Operation Lamp
7 color lights blink and then turns off when
the camera is ready to take a picture
X
X
X
X
X
Purple lamp blinks at a 1-second interval
Blue lamp blinks at a 1-second interval
X
X
Green lamp blinks once for 0.3 second
Red l a mp bl i n ks for 7 seconds at a 1-second i n terval / bl i n ks
for 3 seconds at a 0.25 second i n terval
X
: Duracell CP-1 battery
: Digimax power pack (SLB-1037)
: Digimax Battery Pack (SBP-3603)
Camera Status Lamp
Blinks orange once
Green lamp lights up
Green lamp blinks
Red lamp blinks
Orange lamp lights up
Green lamp blinks
X
X
Green lamp lights up
Green lamp blinks
X
X
Green lamp lights up
LCD Monitor
X
Autofocus mark
lights up green
Autofocus mark
lights up red
X
X
X
Auto focus frame : White
X
X
X
X
X
X
13