Pictbridge: Picture Printing - Samsung Digimax U-CA 3 User Manual

PictBridge: Picture Printing

Printing Pictures
1. Connect the camera to your printer. The USB menu must
be set to [PRINTER] before you connect the camera to
the printer.(See p.58)
2. The [PICTBRIDGE] menu will appear.
3. Use the UP and DOWN buttons to select the [PRINT]
menu, and then press the OK button.
4. The screen shown on the right will appear and the picture
will be printed. If no picture is selected, the [NO IMAGE!]
message will be displayed. If you press the SHUTTER
button during printing, printing will be cancel and the menu
from Step 2 will appear.
5. If an error occurs during printing, the screen shown below will appear.
FATAL ERROR
SET:OK
[ Fatal error ]
Press the OK button to cancel printing.
Follow the Steps 1 to 4 again to print the
picture(s).
INFORMATION
When printing pictures by connecting the camera to the printer, use the AC adapter.
If the printer is turned off during printing, the printing will stop and the paper will be dispelled.
If there are continuous print error, please check the print condition.
IMAGES
SETUP
PRINT
MOVE:
STOP:SHUTTER
WARING
R R E E S S U U M M E E : : O O K K
C C A A N N C C E E L L : :
[ Recoverable error ]
Press the OK button to resume
printing, or press the RIGHT button to
cancel printing.
PICTBRIDGE
00 PRINTS
CUSTOM
SET:OK
61