Raymarine AXIOM XL 16 Installation Instructions Manual page 24

1. Using the supplied mounting template as a guide, cut the cut-out hole in the mounting surface. If
you are flush mounting also follow the rebate information on the mounting template.
2. With one person holding the MFD in place, the second person should affix the mounting bars to
the back of the MFD using the supplied M5x20 countersunk screws in 4 locations.
3. Secure the MFD using the provided mounting fixings (M5 bolt, wavy washer, nut and foot. In 4
locations).
Depending on the thickness of the mounting surface the washer and lock nut may be located:
1. between the mounting bracket and mounting feet (as shown in (1) and (2) below, or:
2. after the mounting bracket as shown in (3) and (4) below.
24