Getting Started - D-Link DLM-3500 Quick Installation Manual

While getting started with DLM-3500, you may encounter with complicated settings which may hinder your
progress. This chapter serves to explain the basic functionalities of DLM-3500 and how to operate and
configure the system.It will also cover related subjects in network structures and hardware installation which
will help you during your setup of DLM-3500.
2.1 Preparation
Before you get started, there are few things you need to know:
1. The position of the DLM-3500 LAN Port: It has five network interfaces and the last port is LAN Port which
is marked on the machine.
2. The default IP address for LAN interface is 192.168.0.1
3. Your IP addresses for computers in the LAN should be changed to 192.168.0.2 (or 192.168.0.x) and
subnet mask 255.255.255.0 in order to avoid conflicts with the default LAN port.
4. Check your network environment carefully before installing DLM-3500. A well-designed network
environment with the necessary information such as your network structure, IP addresses, and network
segments information will help you complete the setup of DLM-3500 parameters.
5. DLM-3500 uses a web-based management user interface (Web-based UI). Due to internal design
constraints, you have to use Microsoft Internet Explorer 6.0 (IE 6.0), or higher to access the Web-based
UI. A screen resolution of 800x600 or higher is recommended.
DLM-3500 Quick Installation Guide

2. Getting Started

4