Dhcp Settings - D-Link DLM-3500 Quick Installation Manual

2. Fill in the netmask in the second field. In this example, it is 255.255.255.0.
3. In the third field, you can set it manually or system can get it automatically.
4. Press [Apply] to update all the parameters you have just entered.
5. We assume you connect DLM-3500 directly to access the web management interface by a certain IP
192.168.0.X. After applying new LAN setting, you could not access the web management interface since
the different subnet. You should re-access it using IP such as 192.168.100.X. The IP of DLM-3500 web
management interface now is 192.168.100.254.

2.4.5 DHCP Settings

DHCP server may be enabled at Network -> DHCP setting.
1. Fill in the Lease Time in seconds for DHCP client. In this example, it is 36000.
2. Fill in the Default Gateway that the DHCP clients will use. In this example, it default gateway is the LAN
port of DLM-3500.
3. Fill in the Subnet Mask that the DHCP clients will use.
4. Fill in the Domain Name that the DHCP clients will use, this field is optional.
5. Fill in the DNS Server's IP address that DHCP clients will use in the [DNS Server] filed. Please note that
the DNS server must be set properly to LAN user to go to Internet successfully.
6. Administrator can specify the DHCP pool range that the DHCP clients will use by filling the Dynamic
Range Start and Dynamic Range End field.
DLM-3500 Quick Installation Guide
12