2.4 Ghz Wireless Network - EnGenius ENS202v2 User Manual

This page displays the current status of the Wireless
settings of the AP.

2.4 GHz Wireless Network

Operation Mode: Scrow down this list to select operation
modes for implementing on this radio. The default operation
mode is Access Point on base stations and Access Points
and is Client Bridge on Client Premise Equipements (CPE).
Meanwhile, EnGenius outdoor devices also support WDS
modes for peer to peer or peer to multi-peer connections.
Wireless Mode: Scrow down this list to select wireless
broadcasting standard on 2.4GHz frequency bands.
Channel HT Mode: Scrow down this list to select bandwidth
for operating under a frequency band. The default
channel bandwidth is 20 MHz on 2.4GHz frequency radio.
Considering the different applications, users can decide to
implement a channel bandwidth to fulfill real applications.
The larger the channel, the greater the transmission quality
and speed.
Channel: Click Configuration button to open a new
windows to configure channels for performing wireless
service.
Transmit Power (Tx Power): Default Tx power is Auto
to obey regulartory power of each country.
Bit Rate: 2.4GHz is default 1 Mbps, the range can
control by BAR via scroll from 1Mbps to 54Mbps.
36