Table of Contents
Advertisement
Tools
Ping Test Parameters
This page allows you to analyze the connection quality
of the AP and trace the routing table to a target in the
network.
Target IP/Domain Name: Enter the IP address or domain
name you would like to search.
Ping Packet Size: Enter the packet size of each ping.
Number of Pings: Enter the number of times you wish to
ping.
Start: Click Start to begin pinging the target device (via IP).
Traceroute Target
Target IP/Domain Name:Enter the IP address or domain
name you wish to trace.
Start : Click Start to begin the trace route operation.
Nslookup Test Parameter
Target IP/Domain Name:Enter the IP address or domain
name you wish to do Nslookup test.
55
Advertisement
Table of Contents
