Ghz/5 Ghz Wireless Network - EnGenius EWS371AP User Manual

*None: Click "None" to disable the setting on this radio.
This radio is disabled.
*Group Configuration: Click specific groups of channels
for performing auto channel function. For example, users
can click U-NII-1 and U-NII-3 to perform auto channel on
these bands; the mechanism of this AP will select the
relatively optimal channel to peform wireless service.
Data Rate: Select a data rate from the drop-down list. The
data rate affects throughput of data in the AP. Select the
best balance for you and your network but note that the
lower the data rate, the lower the throughput, though
transmission distance is also lowered.
RTS/CTS Threshold: Specifies the threshold package size
for RTC/CTS. A small number causes RTS/CTS packets to be
sent more often and consumes more bandwidth.
Client Limits: Limits the total number of clients on this radio.
Once setting the ceiling of client numbers, the maximum
assocaited client devices will be restricted at this number.
Aggregation: Integrate multiple data packets into one
packet to deliver to client devices. This option reduces the
number of packets, but also increases packet sizes.
AP Detection: AP Detection can select the best channel to
use by scanning nearby areas for Access Points.
Distance: Specifies the distance between Access Points
and client devices. The proper setting for this parameter
may assist Access Points to avoid the improper operation
when transmitting data under a filed application.
* The Distance setting should be supported on the outdoor
Access Point including EWS870AP and EWS871AP.
Save: Click Save to confirm the changes or Cancel to cancel
and return to previous settings.
40