SRAM RockShox Super Deluxe Service Manual page 51

Press the air can onto the damper then thread it onto the shaft eyelet
4
until it is hand tight.
Spray isopropyl alcohol on the outside of the air can and clean it with
a rag.
Remove the shock from the vise. Turn it over and clamp the damper
5
body eyelet in the vise.
Stabilize the air can with a strap wrench to prevent it from rotating.
Tighten the air can to 4.5 Nm (40 in-lb).
Remove the shock from the vise. Spray isopropyl alcohol on the shock
6
and clean it with a rag.
Install the sag indicator o-ring.
7
Strap wrench 4.5 N·m (40 in-lb) 13 mm
Air Can Installation 51