SRAM RockShox Super Deluxe Service Manual page 22

Insert a rag through the damper body eyelet to prevent the air can
5
from forcefully ejecting from the shock.
⚠ CAUTIO N- E YE HAZARD
The air can may still have air pressure in the negative chamber, which
may cause the air can to forcefully eject from the shock upon
disassembly. Wear safety glasses.
Use a strap wrench to remove the air can. Wrap the strap around the
6
section of the air can furthest from the shaft eyelet. Turn the wrench
counter-clockwise to unthread the air can.
Do not place the strap wrench on the air can decal.
Once it is completely unthreaded, slowly pull the air can along the
damper body to remove it and the Counter Measure™.
Remove the rag from the damper body eyelet.
Vacuum pressure will increase as you pull the air can along the
damper body, and will suddenly release when the air can is pulled
over the air piston.
NOTI CE
Strap Wrench
Counter Measure
Air Can Removal 22