SRAM RockShox Super Deluxe Service Manual page 43

Tap the shock on the bench a few times to purge any excess bubbles,
8
then install the IFP bleed screw into the IFP. The bleed screw should be
submerged in oil.
Pour out any excess oil.
Remove the shock from the vise, and slide the seal head/air piston until
9
it stops at the end of the damper shaft.
Clamp the damper body eyelet into the vise. Wrap a clean rag around
10
the damper body.
Pour new RockShox® 7wt suspension oil into the damper body until it is
11
level with the top.
T10 TORX®
7wt
Shock Assembly and Bleed 43