Making Use Of The Height Compensation Tool; Using The Compensation Plate - Bernina Kaffe 770 QE PLUS Manual

Buttonholes

9.2 Making use of the height compensation tool

When a buttonhole is to be sewn at right angles to the project edge, it is recommend to use the height
compensation plates (optional accessory).
> Place the plates from the back between the sewing project and the bottom of the slide to the thick part
of the sewing project.
> Lower the presser foot.

9.3 Using the compensation plate

For sewing a buttonhole in problematic fabrics, it is recommended to use the Height Compensation Tool
(optional accessory). The Height Compensation Tool can be used in combination with the Buttonhole Foot
with Slide #3A.
> Insert the compensation plate carefully from the side.
110