Verifying NAT Statistics
ip nat pool pool5 20.1.1.1 20.1.1.5 netmask 255.0.255.0
ip nat pool pool7 netmask 255.255.0.0
address 40.1.1.1 40.1.1.5
This example shows how to display active NAT translations:
Inside pool with overload
switch# show ip nat translation
Pro
icmp 20.1.1.3:64762
icmp 20.1.1.3:64763
switch# sh ip nat translations verbose
Pro Inside global
any 1.1.1.1
icmp 101.1.0.1:65351
udp 101.1.0.1:65383
tcp 101.1.0.1:64549
Outside pool without overload
switch# show ip nat translation
Pro
any
any
any
switch# show ip nat translations verbose
Pro Inside global
any 1.1.1.1
any 101.1.0.1
Verifying NAT Statistics
To display Network Address Translation (NAT) statistics, perform the following task:
Command
show ip nat statistics
Cisco Nexus 3548 Switch NX-OS Interfaces Configuration Guide, Release 9x
116
Inside global
Inside local
10.1.1.2:133
10.1.1.2:134
Inside local
10.1.1.2
Flags:0x1
Entry-id:0
101.0.0.1:0
Flags:0x82
Entry-id:101
101.0.0.1:63
Flags:0x82
Entry-id:103
101.0.0.1:8809
Flags:0x82
Entry-id:102
syn:0:1:9
fin-rst:12:0:9
Inside global
Inside local
---
---
---
---
---
---
Inside local
10.1.1.2
Flags:0x1
Entry-id:0
101.0.0.1
Flags:0x0
Entry-id:92
Outside local
20.1.1.1:0
20.1.1.1:0
Outside local
---
State:0x0
Group_id:0 Format(H:M:S) Time-left:0:0:-1
102.1.0.1:231
State:0x3
Group_id:0 VRF: red Format(H:M:S) Time-left:12:0:9
102.1.0.1:63
State:0x3
Group_id:0 VRF: red Format(H:M:S) Time-left:12:0:9
102.1.0.1:9087
State:0x1
Group_id:0 VRF: red Format(H:M:S) Time-left:12:0:9
Outside local
177.7.1.1:0
40.146.1.1:0
10.4.146.1:0
Outside local
---
State:0x0
Group_id:0 Format(H:M:S) Time-left:0:0:-1
---
State:0x3
Group_id:0 VRF: red Format(H:M:S) Time-left:12:0:11
Purpose
Display Network Address Translation (NAT)
statistics.
Configuring Static and Dynamic NAT Translation
Outside global
20.1.1.1:0
20.1.1.1:0
Outside global
---
102.1.0.1:231
102.1.0.1:63
102.1.0.1:9087
Outside global
77.7.1.64:0
40.46.1.64:0
10.4.46.64:0
Outside global
---
---