Replacing The Aquaclean Filter; Replacing The Aquaclean Filter After 8 Filters Were Used - Saeco Incanto HD8911 User Manual

ON
OFF
0 / 8
AQUA CLEAN
FILTER
1 / 8
AQUA CLEAN
FILTER
1 / 8
0%
AQUA CLEAN
FILTER
NEW?
AQUA CLEAN
FILTER
2 / 8
3 Select ON on the display, press the OK button to confirm.
4 The display automatically updates the number of filters used.
-
Then the 'machine ready' screen appears with the AquaClean
100% icon to indicate that the filter has been installed.
5 Dispense 2 cups of hot water (0.5 l) to complete the activation.
Discard this water.

Replacing the AquaClean filter

Note: Replace the AquaClean filter as soon as the capacity has
dropped to 0% and the filter icon flashes quickly. Replace the
AquaClean filter at least every 3 months, even if the machine has
not yet indicated that replacement is required.
Tip: We advise you to buy a new filter when the capacity has
dropped to 10% and the filter icon starts flashing slowly. This
ensures that you can replace the filter when the capacity has
dropped to 0%.
1 Take out the AquaClean filter and replace it by a new AquaClean
filter (also see the separate quick start guide).
2 Press the MENU button, scroll to AQUACLEAN FILTER and press
the OK button to confirm.
-
The display asks if you want to activate a new filter.
3 Press the OK button to confirm.
-
The display automatically updates the number of filters used.
4 Dispense 2 cups of hot water (0.5 l) to complete the activation.
Discard this water.

Replacing the AquaClean filter after 8 filters were used

1 When the filter icon starts flashing on the display, press the
MENU button, scroll to AQUACLEAN FILTER and press the OK
button to confirm.
English
15