Saeco Incanto HD8911 User Manual page 33

Problem
The milk does not
froth.
There is water under
the machine.
I cannot activate the
AquaClean filter and
the machine asks for
descaling.
Cause
The classic milk frother is dirty or
not assembled correctly.
The type of milk used is not
suitable for frothing.
The drip tray is too full and
overflowed.
The machine is not placed on a
horizontal surface.
You have already replaced
the AquaClean filter 8 times.
After you have replaced the
AquaClean filter 8 times, you
need to descale the machine.
The filter has not been replaced
in time after the AquaClean filter
icon flashed and the capacity
dropped to 0%.
You did not install the
AquaClean filter during first
installation, but after having
brewed approx. 50 coffees
(based on 100ml cups). The
machine has to be completely
limescale-free before you install
the AquaClean filter.
You did not activate the new
or replaced AquaClean filter in
the machine menu. Also after
replacing the filter, you need to
confirm activation in the machine
menu.
Solution
Clean the classic milk frother
and make sure it is correctly
assembled.
Different types of milk result in
different amounts of froth and
different froth qualities. We
have tested the following milk
types which proved to deliver
a good milk froth result: semi-
skimmed or full-fat cow's milk,
soy milk and lactose-free milk.
Other types of milk have not
been tested and may result in
a small amount of milk froth.
Empty the drip tray when the
'drip tray full' indicator pops up
through the drip tray. Always
empty the drip tray before you
start descaling the machine.
Place the machine on a
horizontal surface so that the
'drip tray full' indicator works
properly.
Descale your machine first and
install the AquaClean filter.
Always activate the AquaClean
filter in the menu. Also do this
when you replace the filter.
Descale your machine first and
then install the AquaClean
filter.
First descale the machine and
then install a new AquaClean
filter. After descaling, the filter
counter is reset to 0/8. Always
confirm filter activation in the
machine menu. Also do this
after filter replacement.
Descale your machine first.
Then activate the AquaClean
filter in the menu. Also do this
when you replace the filter.
English
33