Saeco Incanto HD8911 User Manual page 23

7 Clean the top part of the coffee exit duct thoroughly with a
spoon handle. Insert it as indicated in the figure.
8 Clean the bottom part of the coffee exit duct thoroughly with a
spoon handle or with the multifunctional tool provided with the
machine. Insert it as indicated in the figure.
9 Remove the coffee residues container, empty it and rinse it under
lukewarm running water. Let it dry and then reinsert it.
10 Rinse the brew group thoroughly under lukewarm running water.
Clean the upper filter carefully.
Caution: Do not clean the brew group in the dishwasher and
do not use dishwashing liquid or a cleaning agent to clean it.
This may cause the brew group to malfunction and may have
a negative effect on the coffee taste.
11 Let the brew group air-dry thoroughly.
Note: Do not dry the brew group with a cloth to prevent fibers
from collecting inside the brew group.
12 Clean the inside of the machine with a soft damp cloth.
13 Before you slide the brew group back into the machine, make
sure the two reference signs on the side match. If they do not
match, perform the following step:
English
23