Speaker Tracking; About Speaker Tracking - Cisco TelePresence Touch 10 User Manual

Camera

Speaker Tracking

1
To enable Speaker Tracking, tap Camera, in the
upper right corner.
3
Tap anywhere outside the menu to exit.
To deactivate Speaker Tracking, repeat the
procedure.
D1534509 Cisco TelePresence User Guide
Systems using Touch10
Produced: March 2018 for CE9.3
All contents © 2010–2018
Cisco Systems, Inc. All rights reserved
2
Activate the Speaker Tracking feature by
tapping the button in the upper right corner.

About Speaker Tracking

Systems equipped with a speaker
tracking camera system use camera
working together with a built-in
microphone array. The system will
track and show the person speaking
so that you won't have to use the
Camera Control menu or Camera
Presets to zoom in and out.
When speaker tracking has been
activated, the camera position
presets will not be available. You
must turn off speaker tracking to get
access to the presets.
Activate speaker tracking as shown
on this page again, if needed.
Note Speaker tracking will not work
if the microphones are muted.
Speaker tracking may be expanded
to include the Snap to Whiteboard
and Presenter Tracking features, as
outlined on the following page.
36