Control Own Camera; About Editing Presets - Cisco TelePresence Touch 10 User Manual

Camera

Control Own Camera

Using your camera presets
1
In a call or outside a call (shown here),
tap Camera.
Adjusting your camera's pan, tilt and zoom
4
In a call or outside a call (shown here),
tap Camera.
D1534509 Cisco TelePresence User Guide
Systems using Touch10
Produced: March 2018 for CE9.3
All contents © 2010–2018
Cisco Systems, Inc. All rights reserved
2
Select the preset to use.
5
Adjust Pan, Tilt and Zoom. The
selfview will be temporarily turned
on to assist you.
3
Tap anywhere outside the menu when
you're done.
6
Tap anywhere outside the menu when
you're done.

About Editing Presets

Existing camera presets can be
used right away during a call.
Your video system may have more
than one camera, for example one
camera showing the participants,
while another shows the whiteboard.
If you need to add new or modify
existing camera presets, this is
done in the same way as you do
outside a call. As an alternative
to adding or editing presets, a
simple adjustment of your camera's
pan tilt and zoom should also be
considered.
38