Lock As Speaker-Remaining The Prominent Speaker - Cisco MX200 Series User Manual

39 Video conferencing
Lock as speaker—remaining the prominent speaker
Start with a layout
showing one the
participants as the
prominent speaker,
and tap that
speaker's avatar.
This is an example of a layout with
one of the participants shown as the
prominent speaker, i.e. shown larger
than the other(s).
Tap Lock as speaker, as
outlined.
Once activated the name
of this field will change to
Unlock as speaker.
To unlock, repeat the process
tapping Unlock as Speaker
instead.
About Lock as Speaker
Assume you have set your system
so that one of the participants is
shown larger than the others.
If someone else starts to speak
instead of this person, the system
will switch to display the image of
that person instead. To avoid this,
you may lock the current person as
speaker. This person will then be
shown permanently as the prominent
speaker.
D1458217 User Guide Cisco TelePresence
Profile Series, Codec C-series, Quick Set C20
SX20 Quick Set, MX200, MX300
Produced: November 2013 for TC7.0
All contents © 2010–2013
Cisco Systems, Inc. All rights reserved.