Place Call Using Name, Number Or Ip-Address; About Placing Calls - Cisco TelePresence Touch 10 User Manual

Video Calls

Place Call Using Name, Number or IP-Address

1
Tap the Call button.
3
Key in a name, number or address. Possible
matches and/or suggestions will appear as you
type. If the correct match appears in the list tap
that match, otherwise keep typing.
D1534509 Cisco TelePresence User Guide
Systems using Touch10
Produced: March 2018 for CE9.3
All contents © 2010–2018
Cisco Systems, Inc. All rights reserved
2
Tap the Search or Dial field. This will invoke
the keyboard
4
When you have typed or located
whom to call, tap the name and then
tap the green Call button to place the
call.

About Placing Calls

You may call someone who is not
listed in your list of contacts by
keying in their name, address or
number using the virtual keyboard of
the Touch pad.
Anyone you have previously called
or who has called you, will appear
in the Recents list and you may
transfer any of them to your list of
Favorites. This is described in the
section Contacts.
Sometimes you may be urged to
enter numbers during a call, typically
to reach extensions or to provide a
pin code.
Tap Touch Tones (this button
appears as soon as the call is
placed) to invoke the keypad
needed for this.
Note that Recents can be cleared
from the web interface only.
9