KTM 1290 Super Duke R 2018 Owner's Manual page 89

–
Press the UP or DOWN button until the MTC/ABS menu is
marked on the display. Press the SET button to open the menu.
–
Press the UP or DOWN button to navigate to the required menu
item.
–
Press and hold the SET button for 3-5 seconds.
The commands Keep pressed and Release button are displayed
on the combination instrument.
In the MTC/ABS menu, MTC and ABS can be switched off.
In ABS Mode you can select between ROAD and SMOTO.
Info
MTC can also be deactivated during the ride. Do not open
the throttle when doing so.
After the ignition is switched on, motorcycle traction con-
trol and ABS are enabled again.
In the ROAD ABS mode, the ABS controls both wheels.
In the SMOTO ABS mode, the ABS only controls the front
wheel. There is no ABS intervention on the rear wheel. The
ABS indicator lamp flashes slowly to remind you that the
SMOTO ABS mode is enabled.
In the SMOTO ABS mode, the rear wheel may lock and
there is a risk of falling.
COMBINATION INSTRUMENT 7
87