KTM 1290 Super Duke R 2018 Owner's Manual page 183

–
Check the chain sliding piece for wear.
» If the lower edge of the chain is in line with or below the
chain sliding piece:
–
Change the chain sliding piece.
–
Check that the chain sliding piece is firmly seated.
» If the chain sliding piece is loose:
–
Tighten the screw on the chain sliding piece.
Guideline
Remaining screws,
chassis
E00688-10
Finishing work
–
Remove the rear of the motorcycle from the lifting gear.
( p. 157)
SERVICE WORK ON THE CHASSIS 13
M8 25 Nm
(18.4 lbf ft)
181