KTM 1290 Super Duke R 2018 Owner's Manual page 104

8 ERGONOMICS
B 0 0 B
102
A 0 0 A 1 0 0 1
2 0 0 2
3 3
4 0 0 4
S01727-10
–
1
Remove screws . Take off the handlebar clamps
tion the handlebar so that screws
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
3
Remove screws . Take off handlebar supports
–
Move the handlebar supports into the desired position
or B . Mount and tighten screws
Guideline
Mount the left and right handlebar supports in the same
position.
Screw, handle- M10
bar support
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned cor-
rectly.
–
Position the handlebar clamp. Mount screws
evenly.
2
. Posi-
3
are accessible.
4
.
A
3 .
40 Nm (29.5 lbf ft)
Loctite 243™
®
1
and tighten