15 WHEELS, TIRES
204
–
Position the brake calipers and check that the brake linings
are seated correctly.
–
Mount screws
yet.
–
Operate the hand brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point. Fix the hand brake lever in the activated position.
The brake calipers straighten.
–
Tighten screws
R01777-11
Guideline
Screw, front
brake caliper
–
Remove the locking piece of the hand brake lever.
–
Take the motorcycle off the front lifting gear. (
–
Remove the rear of the motorcycle from the lifting gear.
(
p. 157)
5
on both brake calipers but do not tighten
5
on both brake calipers.
M10
45 Nm (33.2 lbf ft)
Loctite
®
243™
p. 159)