Table of Contents
Advertisement
Compliance and Certifications
Safety
Note
For UL and other safety certifications, refer to the product label or visit
certification
in the Certification column.
Electromagnetic Compatibility
For EMC compliance, operate this device with shielded cabling.
Note
CE Compliance
Note
Refer to the Declaration of Conformity (DoC) for this product for any additional
regulatory compliance information. To obtain the DoC for this product, visit
certification
in the Certification column.
NI TB-2633 Installation Instructions
This product is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control,
and laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 61010-1, CSA 61010-1
, search by model number or product line, and click the appropriate link
This product is designed to meet the requirements of the following
standards of EMC for electrical equipment for measurement, control,
and laboratory use:
•
EN 61326 EMC requirements; Minimum Immunity
•
EN 55011 Emissions; Group 1, Class A
•
CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A
This product meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
2006/95/EC; Low-Voltage Directive (safety)
•
2004/108/EC; Electromagnetic Compatibility Directive (EMC)
•
, search by model number or product line, and click the appropriate link
6
ni.com/
ni.com/
ni.com
Advertisement
Table of Contents
