Install The Terminal Block - National Instruments NI TB-2633 Installation Instructions Manual

4. Install the Terminal Block

1 Jackscrews
© National Instruments Corporation
To connect the NI TB-2633 terminal block to the NI PXI-2533 front panel,
complete the following steps while referring to Figure 3.
1. Connect the NI PXI-2533 front connector to its mating connector on
the terminal block.
2. Tighten the top and bottom jackscrews on the terminal block to hold it
securely in place. Do not overtighten the screws.
2
1
1
4
2 Front Connector
Figure 3. Installing the NI TB-2633 Terminal Block
3
3 NI PXI-2533
5
4 NI TB-2633
NI TB-2633 Installation Instructions